The USB DMX interface is designed around a double sided PCB with thru hole plating. This can prove quite difficult to make yourself, so I have had some ready made. The PCB is a professional double sided PCB, complete with solder mask and silk screen component layout.
I have tried to keep the prices as low as possible. In order to do this I have broken the postage cost out, please make sure you add the corrcet postage for your location. If you require more than 1 item please contact me for a postage price, as there may well be some savings.
If you wish to place an order please click Add to Basket to pay by paypal or for other payment options.
PCBs and processors are sent regular airmail (1st class post within the UK). All other items are sent by signed for airmail or special delivery within the UK. They will require a signature and are insured for loss or damage.
I often get asked whats the difference between the commerical and the non commerical firmware. There is no technical difference between them. I have not restricted the non commerical firmware in anyway. You may use it in education, charity or for private use (inc software development and testing).
I also get asked I'm doing XYZ do I need the commerical version? The answer I awlays give is if you are going to make money from using the interface, then you need the commercial version.
|
Commercial Interface
A fully built and tested interface complete with a commercial firmware license.
|
£125 + P&P
|
|
|
NON Commercial Interface
A fully built and tested interface for NON COMMERICAL use only.
|
£105 + P&P
|
|
Fully cased kit
This is a kit of all the parts needed to make a fully cased commercial interface. The USB interface and microprocessor are both fully programmed, and come supplied with the commerical firmware.
|
£103 + P&P
Out of Stock
|
|
|
Fully cased kit (NON COMMERCIAL FIRMWARE)
This is a kit of all the parts needed to make a fully cased interface. The USB interface and microprocessor are both fully programmed.
The interface build from this kit can be used in education, charity or for private use (inc software development and testing).
|
£83 + P&P
Out of Stock
|
|
PCB based kit (NON COMMERCIAL FIRMWARE)
This is a kit of all the parts needed to make an interface without a case or XLR socket. The USB interface and microprocessor are both fully programmed.
|
£66 + P&P
Out of Stock
|
|
Revision 1.3 PCB
A professional double sided PCB, complete with solder mask and silk screen component layout.
Also includes the UM245R conversion PCB.
|
£10 + P&P
|
|
Pre programmed microprocessor - 44 pin PLCC
A microprocessor for the revision 1.3 PCB. Pre loaded with the commercial firmware.
|
£35 + P&P
|
|
|
Pre programmed microprocessor - 44 pin PLCC
(NON COMMERCIAL FIRMWARE)
A microprocessor for the revision 1.3 PCB.
The interface build from this processor can be used in education, charity or for private use (inc software development and testing).
|
£15 + P&P
|
|
Pre programmed microprocessor - 40 pin DIP
A microprocessor for the revision 1.2 PCB. Pre loaded with the commercial firmware.
|
£35 + P&P
|
|
|
Pre programmed microprocessor - 40 pin DIP
(NON COMMERCIAL FIRMWARE)
A microprocessor for the revision 1.2 PCB.
The interface build from this processor can be used in education, charity or for private use (inc software development and testing).
|
£15 + P&P
|
