If Chameleon is in Record Mode the Red LED will be illuminated on the X Keys keyboard. To change into Program Mode simply rotate the mode switch toward the top of the keyboard. In some instances (such as when [[Playback Mode]] has been automatically selected by opening a how file) the mode witch may already be rotated this way, simply rotate it down, and then back up again.

!! Record Mode

* [[#set |Changing to Record Mode]]
* [[#using |Using Record Mode]]

[[#set]]
!!! Changing to Record Mode

If Chameleon is in Record Mode the Red LED will be illuminated on the X Key keyboard. To change into Program Mode simply rotate the mode switch toward the top of the keyboard. In some instances (such as when [[Playback Mode]] has been automatically selected by opening a how file) the mode witch may already be rotated this way, simply rotate it down, and then back up again.

Attach:RecordMode1.gif"Keyboard" | %center% '''X Keys Program Switch'''

You can also change the mode to Record by selecting ''Record'' from the ''Mode'' menu.

[[#using]]
!!! Using Record Mode

Record mode allows you to make changes to the current show file. If you are in [[Playback Mode]], you will not be able to update any [[Channel Configuration | Channels]], [[Scenes]] or [[Chases]].

Record mode allows normal operation of all the [[Faders]], and also enables the [[Command Line]] to capture channels, so that the [[Faders]] can no longer update the channel values.

%center% <|[[OnlineManual | Contents]]|>